1. Applications of mining chain hydraulic shears
The split anchor chain (circular chain) cutters produced by our company are mainly used for anchor chains (circular chain) in various machinery, metallurgy, petroleum, bridges, fire protection and other departments. ) cut. The machine adopts a split structure, which is small in size, light in weight, easy to operate, flexible in use, and has strong cutting force. In particular, the manual anchor chain (circular chain) cutter does not require a power supply and is more suitable for field operations.
Each component of this product has a compact structure and is processed with high-quality materials and advanced technology. It is currently the ideal anchor chain (circular chain) cutting tool in China.
2. Technical Parameters of Mining Chain Hydraulic Shears
Model Large Chain Ring Diameter Cutting Force Working Pressure Handle Operating Force
If you need to customize shearing devices with other specifications, please contact the sales hotline for details.
Circular chain shear for mining chain hydraulic shears
3. How to use and precautions for mining chain hydraulic shears
This series of products is used to cut various anchor chains ( Ring chain) metal material. When using, adjust the bolt according to the diameter of the anchor chain (circular chain), and place the anchor chain (circular chain) at a right angle to the cutter head
. When using, first fill the manual pump with anti-wear hydraulic pressure oil, then connect the manual pump quick connector to the main engine oil cylinder, and tighten the oil drain screw on the oil pump to start work. Similarly, when the oil drain screw is loosened after the work is completed, the working cylinder will automatically retract
. Before use, retract a few working strokes and wait until all parts move flexibly and there is no oil leakage before use.
.If air-drying occurs during use, you can first loosen the oil drain screw on the pump body, hold the pump body vertically and air-dry it with the head down for a few times, then tighten the oil drain screw, and you can continue to use it
/> .When there is a load, do not remove the quick connector to avoid accidents and damage to the machine parts
.Check the oil level. If the oil level is insufficient, the machine will not be able to maximize its performance. Some abnormal situations such as poor movement are caused by insufficient oil.
.Use anti-wear hydraulic oil or transformer oil in the cylinder. When refueling, you can remove the rubber protective sleeve at the end of the oil pump, and then unscrew the hexagonal socket screw to connect the oil outlet pipe to refuel, but when refueling, be sure to slow down and shake the handle to exhaust it. If the oil pipe no longer bubbles, it is full
Hydraulic shearing ring chain cutter for mines
. After cutting, no material head is allowed to be left between the blades of the tool holder. Otherwise, the moving cutter head will be blocked and the body will be damaged.
.For harder and tougher steel, the maximum cutting force must be calculated, and attention must be paid to the short material head flying out and injuring people, and safety measures must be taken.
.The blade can be used on both sides, and a spare blade needs to be replaced after wear.
.If left unused for a long time, it should be stored in a dry and corrosive gas-free environment.
34-ring chain hydraulic shear